SURFACESTUDI
+91 95059 69558 Instant Quote
Wardrobe with sage-green matte PU shutters and brass handles

PU paint & polish studio · Hyderabad

We Create
Precision Coated.

We finish kitchens, wardrobes, doors and furniture in PU, using Sirca, ICA and Axalta coatings. Matte or glossy, any shade, matched to your sample.

Upload cutlist for a quote WhatsApp us See finishes
  • Studio in IDA Bollaram
  • Open Mon – Sat, 9:30 am – 5:30 pm
  • Sample panel before production
We finish with SIRCA ICA AXALTA

Every surface
tells a story.

Surface Studio is a finishing studio dedicated to one thing: surfaces that look and feel exceptional for years.

We match the coating system to the job: a matte kitchen shutter, a glossy wardrobe, or an open-grain veneer that should look like nothing was applied at all. You send us panels. We send back finished pieces, ready to install.

  • Genuine branded coatings, never diluted
  • Every panel tracked from cutlist to dispatch
  • Shade matched to your sample, RAL or NCS
Close-up of a deep navy high-gloss PU shutter with a clean sprayed edge
Glossy PU · sprayed, sanded, buffed

What we do

Finishing expertise

Five services, one standard. Sprayed by hand, sanded between coats and cured with patience.

Ask for a quote Teak veneer door finished in clear glossy PU polish
01

PU Paint

Solid-colour 2K polyurethane on MDF and HDHMR shutters, in matte or glossy. Any RAL or NCS shade, or matched to your sample. From ₹300 per sq ft.

Kitchens · wardrobes · TV units · wall panels

02

PU Polish

Clear PU over veneer and solid wood, natural or tinted, in matte or glossy. The grain stays visible and protected. From ₹210 per sq ft.

Veneer shutters · doors · furniture

03

Metallic & Pearl PU

Axalta metallic and pearl topcoats for feature shutters and statement units. From ₹400 per sq ft.

Feature walls · islands · display units

04

Modular Panel Finishing

Send your factory cutlist. Every panel is barcode-tracked, finished on one or both sides as listed (BSL / OSL) and returned in batches.

Modular factories · interior firms

05

Furniture & Door Refinishing

Old polish sanded back, filled and re-coated in PU polish or paint, for doors, chairs and loose furniture.

Homes · renovations

Instant quote

Upload your cutlist.
Get a price.

Drop in the panel list from your factory or designer and see an estimate in seconds, worked out from our current Sirca, ICA and Axalta rates.

  1. 1Upload the cutlistExcel (.xlsx) or CSV with length, width and quantity columns. Factory lists with CLENG / CWIDTH / CNT work as they are.
  2. 2Pick the finishPU paint or polish, brand and sheen. Sides are read from BSL / OSL codes when present.
  3. 3Send us the quote codeShare it on WhatsApp with the file, and we confirm after inspecting the panels.

Private by design: your file is read on your own device and is never uploaded to our servers.

No file chosen yet.

Metallic and pearl are available with Axalta PU paint. Prefer to talk? Send your details and we will call you.

Who we work with

Built around how you work

Interior designers & architects

Send a drawing and a reference. We sample the finish on a panel for your client to approve, then match it across the whole project.

Modular kitchen factories

Share the panel list. We track every panel by barcode and return finished batches in the order your installers need them.

Homeowners & carpenters

Bring your shutters, doors or furniture to the studio in IDA Bollaram. We help you choose the system, shade and sheen.

PU, explained

What is a PU finish?

PU is short for polyurethane: a two-component coating, mixed with a hardener and sprayed in thin layers, that cures into a tough, smooth film in matte or glossy.

That film resists scratches, stains and moisture far better than traditional polishes, which is why PU has become the standard for premium kitchens, wardrobes and doors. Pigmented, it is PU paint. Clear, over wood or veneer, it is PU polish.

Surfaces PU can be applied to

MDF HDHMR Solid wood Veneer Plywood WPC Laminate Metal Glass

For kitchens and humid areas we recommend HDHMR over standard MDF, with every face and edge sealed so moisture cannot get in.

Anatomy of

a PU painted shutter

  1. 01Board — smooth, stable MDF or HDHMR
  2. 02Sanding & edge sealing — faces and edges closed off
  3. 03PU sealer & primer — built up and sanded level
  4. 04Colour coats — shade-matched PU
  5. 05Finish coat — matte, glossy or a clear coat for depth

Anatomy of

a PU polish

  1. 01Core — natural wood or veneer
  2. 02Sanding — the grain opened and smoothed
  3. 03Filling — pores, holes and cracks made good
  4. 04PU sealer — two coats, sanded between
  5. 05Clear topcoat — matte, glossy or natural "invisible"

PU vs Duco vs Melamine

How the three common wood finishes compare.

PUDucoMelamine
DurabilityHighest of the threeLower, can chipBasic
Gloss over timeHolds its sheenTends to dullTends to fade
Yellowing & crackingResists bothMore proneMore prone
Moisture & stainsStrong resistanceModerateBasic
FlexibilityMoves with the boardStiffer filmStiffer film

One side or both? (OSL / BSL)

Factory lists mark panels BSL (both sides lacquered) or OSL (one side, laminate behind). We price each face that gets PU, so shutters are usually BSL and carcass sides OSL.

Narrow strips per running foot

Skirtings, fillers and adders 100 mm wide or less are charged per running foot instead of per sq ft, which keeps small parts fairly priced.

Caring for a PU finish

Wipe with a soft microfibre cloth and mild soap. Avoid harsh chemicals, abrasive pads and standing water, and let the finish cure fully before heavy use.

Our coating partners

Three coating houses.
One studio.

SIRCA

Italian wood coatings

Our go-to for kitchens and wardrobes: Sirca 2K PU lays down a dense, even film with good clarity, in matte or glossy paint and natural or tinted polish.

Best for: kitchen shutters, wardrobes, TV units, doors

Per finished face, before 18% GST. Strips 100 mm wide or less are charged per running foot.
Sirca finishper sq ftper rft
PU Paint · Glossy₹340₹110
PU Paint · Matte₹320₹100
PU Polish · Glossy · Coloured₹245₹95
PU Polish · Glossy · Natural₹240₹90
PU Polish · Matte · Coloured₹225₹85
PU Polish · Matte · Natural₹220₹80

Shade library

Popular PU shades

A few favourites. We can match any RAL or NCS code, or your own sample. Screen colours are approximate, so we always spray a sample panel for approval.

Solid PU colours

PU Paint · Sirca, ICA or Axalta · matte or glossy · from ₹300/sq ft

Metallic & pearl

Axalta PU Paint · from ₹400/sq ft

PU polish wood tones

PU Polish on veneer or solid wood · natural or tinted · from ₹210/sq ft

Matte or glossy

Matte

Soft, low-glare, hides fingerprints best

Glossy

Deep and reflective, easy to wipe clean

How we work

The precision workflow

Five stages. No shortcuts between them.

  1. STEP 01

    Surface Preparation

    Panels inspected, edges checked, sanded and de-dusted for clean adhesion.

  2. STEP 02

    Sealer & Primer

    High-build sealer coats, sanded between layers until the base is level.

  3. STEP 03

    Precision Coating

    Shade-matched topcoat, sprayed in a dust-managed space.

  4. STEP 04

    Controlled Curing

    Full cure time respected, so the film reaches its rated hardness.

  5. STEP 05

    Final Perfection

    Polished, inspected under light, wrapped and dispatched by batch.

FAQ

Questions, answered

What clients in Hyderabad ask us most about PU finishes. Something else on your mind?

Ask on WhatsApp
What is the difference between PU paint and PU polish?

PU paint is pigmented: it covers the surface in a solid colour, used on MDF and HDHMR shutters. PU polish is clear or lightly tinted: it protects veneer or solid wood while keeping the natural grain visible. Both come in matte or glossy.

How much does PU paint and polish cost per sq ft in Hyderabad?

PU paint starts at ₹300 per sq ft and PU polish at ₹210 per sq ft, per finished face, before 18% GST. The exact rate depends on the brand and finish. Upload your cutlist in the instant quote for a full estimate.

Sirca, ICA or Axalta: which is better for my kitchen?

All three suit kitchens. Sirca is our usual choice for hard-wearing kitchen and wardrobe shutters, ICA for premium veneer and feature finishes, and Axalta for metallic or pearl fronts and good-value solid colours. We recommend a system after seeing your material and design.

Is PU better than Duco or melamine polish?

For most interiors, yes. PU is more durable, keeps its gloss longer and is more flexible, so it is less likely to yellow, fade or crack than Duco or melamine. It costs more, and it needs skilled spray application in a dust-controlled space.

Is PU suitable for kitchens and bathroom vanities?

Yes. PU is highly resistant to moisture and stains, so it suits kitchen shutters and vanity units, ideally on HDHMR board with sealed edges. It is not meant for surfaces that sit in standing water.

Will a white PU finish turn yellow?

Standard PU can yellow slightly over time. For whites and pale woods we use non-yellowing acrylic PU systems, such as Sirca Acrylic PU or ICA Finezza Acrylic.

Can you match an existing shade?

Yes. Give us a RAL or NCS code, a laminate or a physical sample, and we will match it and share a sample panel for approval before production.

Do you finish panels for modular kitchen factories?

Yes. Share your factory panel list or cutlist. Every panel is tracked by its barcode, finished as specified and returned in batches matched to your project.

Can PU be applied over laminate?

Yes, once the laminate is properly prepared with a specialised adhesion primer. Any peeling or swollen laminate has to be repaired first.

Can old teak doors be re-polished with PU?

Yes. The old polish is sanded back, holes and cracks are filled, two coats of PU sealer go on, and the door is finished with a clear matte or glossy topcoat. Old teak often shows a richer grain afterwards.

How long does a PU finishing job take?

It depends on the batch size, the finish and the number of coats, and it always includes full curing time. We confirm a delivery date with your quote, and larger projects are delivered in planned batches.

Let's create something remarkable.

Tell us what you are finishing. We will recommend the right Sirca, ICA or Axalta system and send a quote.

Request a quote

Opens WhatsApp with your details filled in. Or email sales@surfacestudio.in.

Visit the studio

Bollaram Industrial Area (IDA Bollaram), Bollaram Village, Hyderabad, Telangana 502325

Plus Code G8XV+8C5 · Mon – Sat, 9:30 am – 5:30 pm · Sunday closed

PU paint & polish across Hyderabad

From our studio in IDA Bollaram we finish panels, doors and furniture for clients across Hyderabad and Secunderabad, including:

Bollaram Miyapur Bachupally Ameenpur Kukatpally Kondapur Gachibowli Madhapur Jubilee Hills Banjara Hills Kokapet Financial District Manikonda Secunderabad Shamshabad